VMWare esxi Unable to connect to the mks the operation is not allowed in the current state

Unable to shut down, migrate or doing pretty much any operation to a VM with error message including “operation is not allowed in the current state”?

Solution might be enabling ssh on the esxi  host, login and try:

  1. Run the esxtop utility using this command:esxtop
  2. Press c to switch to the CPU resource utilization screen.
  3. Press Shift+v to limit the view to virtual machines. This may make it easier to find the Leader World ID in step 6.
  4. Press f to display the list of fields.
  5. Press C (uppercase) to add the column for the Leader World ID.
  6. Identify the target virtual machine by its Name and Leader World ID (LWID).
  7. Press k.
  8. t the World to kill prompt, type in the Leader World ID from step 6 and press Enter.
  9. Wait 30 seconds and validate that the process is not longer listed.

In vSphere client, check if the machine detects it is shut down, if it doesn’t happen right click and choose shut down, hopefully this will work now.

Ref: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014165

Bredbånd på landsbygda 2

Legger en oppdatering på tidligere innlegg om bredbånd på landsbygda. Etter 1,5 års drift er det vel på tide.

Stabilitetsmessig har dette fungert og fungerer fortsatt veldig bra. Ganske utrolig mtp at dette er forholdsvis billig utstyr.

Etter litt justeringer av antenner og tweaking av config oppnår jeg nå (~100Mbps) faktisk høyere hastighet enn hva som var tilfelle rett etter montering.

Testresultat 25.10.2013

Det var en liten oppdatering, dette utstyret anbefales!

Upgrade cisco catalyst 2960 series switch

Upgrade through webinterface doesn’t work well on those switches i think, so doing the upgrade through ios console is usually faster.

  1. Download the tar u want to upgrade to from cisco.com (login needed)
  2. Place the tar reachable for the tftp server (use jounin tftp server if u don’t have any other prefered one, http://tftpd32.jounin.net/tftpd32_download.html)
  3. Make sure firewall on your tftp machine/server is open for tftp or disabled
  4. Login to te switch ios console via serial/telnet/ssh
  5. IOS command: archive download-sw /overwrite /reload tftp://tftpserver_IP/c2960-lanbasek9-tar.150-2.SE4.tar
  6. Wait for the tftp download and the upgrade to finish, the switch will reboot

HP bl490 Virtual Connect NOT-LOGGED-IN

The following can help if you have this problem:

  • Remove the VC profile from the server
  • Open q-logic menu during boot (alt+q), reset the default config
  • Reassign server profile

This occures sometimes when doing firmware upgrades of the q-logic fc mezzanine card.

Egendefinerte maler i Office 2013

Angi område for malfiler: File/Options/Advanced/General/User templates

Gjøre malene tilgjengelig under File->New: File/Options/Save/Default personal templates location

Når dette er satt opp riktig får man et valg ved opprettelse av nye dokumenter som heter “PERSONAL” i tillegg til “FEATURED”.

Mangler skjermbilder her men en god artikkel på dette finnes her: http://blogs.msmvps.com/wordmeister/2013/02/06/word-2013-templates-location-and-filenew/

Windows Utforsker med Administrator privileger (explorer)

Hvis UAC er aktivert i Windows 2008r2 kan det være utfordrende å administrere NTFS rettigheter, du får ikke tilgang til å sette rettigheter i trestruktur. Får feilmelding “Access denied”.

Dette kan løses slik:

  • Start Task manager
  • Høyreklikk på explorer.exe og velg “End process Tree”. Startlinja og iconer på skrivebordet forsvinner.
  • Velg File->New Task (Run) og skriv explorer.exe og hak av “Create this task with administrative privileges”

Nå har du en windows utforsker som kjører med adminstrative privileger. Anbefaler å kjøre samme prosess på nytt når du er ferdig og starte explorer.exe uten hake for “Create this task with administrative privileges”.

Verktøy og lenker

Jeg bruker Line6 Podstudio UX2 og programvaren som følger med. Har kjøpt “Power Pack” i tillegg.

Har en svart ESP EC-50 gitar.

Annen programvare og linker som jeg liker:

Installer Telnet klient

For oss som fortsatt bruker telnetklienten for diverse feilsøking og testing kan denne installeres fra command shell:

pkgmgr /iu:”Telnetclient”

Dette gjelder Windows 7, Windows 8, Windows Server 2008r2